A common paint application tool in a variety of industries, such as metalworking, woodworking, and automotive refinishing, is an air spray gun with suction feed. An air spray gun suction draws paint or other coating materials from a container or reservoir into the gun body using the suction produced by compressed air, as opposed to other types of spray guns that may have gravity or pressure feed mechanisms.
Air Spray Gun Suction Prices
Air spray gun suction prices can vary depending on its water capacity and pattern width. Its price ranges from ₱264.00 to ₱960.00.
| Brand | Capacity | Pattern Width | Price |
| Hoyoma | 1000 ml | 160-240 mm | ₱960.00 |
| WEBER | 750 ml | 30-60 mm | ₱836.00 |
| Buildmate | 400 ml | 30-60 mm | ₱475.00 |
Advantages of Air Spray Gun Suction
Ease of Use – In general, these guns are simpler to assemble and operate, especially for novices or infrequent users. They can be quickly and simply connected to an air compressor with little setup, and they don’t require complex pressurized systems.
Suitable for a Wide Range of Viscosities – With little modification needed, suction feed guns can manage a wide range of coating viscosities, from thin stains to thick paints. Because of their adaptability, they can be used in many different contexts without losing functionality.
Less Overspray – Even though overspray can still happen with any spray gun, suction feed guns’ efficient design allows them to atomize material directly from the container, resulting in less overspray than other types.
Disadvantages of Air Spray Gun Suction
Limited Spraying Distance – When compared to pressure feed guns, air spray gun suction usually has a shorter spraying distance. This restriction can cause issues when attempting to reach far-off or difficult-to-reach places because it forces the user to get closer to the surface being sprayed, which isn’t always practical or feasible.
Potential for Inconsistent Spraying – When the paint or coating level in the container drops, air spray gun suction is more likely to perform unevenly when spraying. The suction tube may draw in air rather than paint when the material level drops, causing variations in the spray pattern and quality.
Dependency on Gravity – Gravity is used by air spray gun suction to extract material from the container. This reliance can be problematic because the gun might not be able to pull in enough material to spray when operating at strange angles or when the container is almost empty.
Video about Air Spray Gun
FAQs
Can I use water-based paints with my air spray gun suction?
Yes, a lot of air spray gun suction works well with water-based paints. However, to avoid corrosion or clogs, make sure you follow the recommended setup and cleaning procedures and review the gun’s specifications.
How do I choose the right air spray gun for my project?
Think about things like your project’s size and scope, your budget, and the kind and viscosity of the material you’ll be spraying. To locate a gun that satisfies your needs, review user feedback and product specs.
What types of materials can I spray with an air spray gun suction?
A variety of materials, such as paints, stains, lacquers, varnishes, primers, and clear coatings, can be applied using an air spray gun suction. The right gun setup and adjustments will depend on the particular type of material and its viscosity.
How do I clean and maintain my air spray gun suction?
Depending on the particular gun model and the materials being sprayed, different cleaning and maintenance protocols may apply. Typically, it entails taking the gun apart, cleaning or flushing it with the proper solvent, and looking for any worn or broken parts. For comprehensive instructions, consult the manufacturer’s manual.
Can I use an air spray gun indoors?
It is possible to use air spray guns indoors, but adequate ventilation is necessary to keep fumes and overspray out of the workspace. To preserve the quality of the air and reduce exposure to dangerous gases, think about utilizing an exhaust system or spray booth.